Engle Roller Cam ID

-
d55dave

d55dave

Well-Known Member
Joined
May 20, 2010
Messages
2,585
Reaction score
1,130
Location
Kelowna, British Columbia
Can anyone help to decode what the original cam specs were for this old Engle BB solid roller cam?

It looks to me like it says JR82/EX3, then an H, and then 108 12 A 0

Thanks!

Screenshot_20210918-093955_Messages.jpg
 
If i were to make a guess, (stress, Guess!) I would say a 112 lda, installed on a 108 cl. But... as far as I know there is only one way to analyze an unknown cam, stick it in a block, and degree it. You can get an idea of the lift with a caliper, measure the heel, measure the toe (of the lobe, )and multiply by the rocker ratio.
 
33IMP said:
If i were to make a guess, (stress, Guess!) I would say a 112 lda, installed on a 108 cl. But... as far as I know there is only one way to analyze an unknown cam, stick it in a block, and degree it. You can get an idea of the lift with a caliper, measure the heel, measure the toe (of the lobe, )and multiply by the rocker ratio.
Click to expand...
Yes, I agree. If I get my hands on it I will properly degree it. Just wondering if anyone knew before I make an offer on it.
 
You must log in or register to reply here.
-

Back
Top