Dumb ***

The dual terminal #90 mini-lamp I mentioned in post #1 is not working. I noticed the "teeth" on the socket base are actually scraping on the body of the lamp socket when I insert the lamp or remove it. I checked for power at the hot wire and continuity for the ground wire and found everything A OK. The courtesy lamps in the sail panels are working fine, also.

I tried two different (new) bulbs but nothing doing. It seems with the insertion and twist the contacts don't line up (not sure). Is there an alternative (similar) bulb that might fit the ticket? Thank you.

Update: I found the problem which was ignorance on my part. I was thinking the yellow wire that also goes to the door switch was a hot wire, but it is actually the ground wire. That means the #90 mini-lamp is working after all!