Hotchkis Sport Suspension Leaf Springs

72Duster440 said
It looks like my current ride height is the same as Red Stripe's, mine is currently at 26" with a 315/35r17 tire, so I can't see why changing to these would change my driveline angles at all. Unless the part of the spring the axle rides on isn't flat like my current springs. Autoxcuda is a good bit lower, I would be in trouble if it rode that low, but I assume it's because it's a different shape wheel arch on his car.
Axle wrap is a concern too, I have an adjustable snubber, but running out of room to lower it and not have it smash into the body over rough roads, which most Michigan roads are.

Thanks guys.

I’ll see if I can get a picture with measurement of Bottom of K-member to ground.

my car is really low. I have to really be careful with parking lot speed bumps. I have TTI full length 1 3/4? headers and Milodon Road Race oil pan.

The smaller diameter tires hurt the ground clearance. Notice my front top of wheel lip measurement is a little higher than rear. I did that for clearance. At first I had the from lip matched to the rear and it was even too low for me. So I just cheated it up a little.