Intake manifold gasket installation help
The MS9935 gasket set just showed up. They are definitely different than what is shown in post #1. Very glad I reached out to the list for input on this intake installation, I didn't have a good feeling about the first set. These fit very nice, and they self locate by resting on the tabs that stick out from the head gaskets. The cork gaskets are identical to the 340/360 set I have. Notice that the U shaped head opening above the exhaust gas port is not covered by the gasket. Evidently it just remains open, doesn't seem to lead to anything, so I guess it doesn't need to be sealed. The top photo is the intake gasket from FS 8553 PT-10, above the MS9935 intake gasket from the set I just received.
![DSC_4700[1].JPG](https://www.forabodiesonly.com/mopar/attachments/dsc_4700-1-jpg.1715796523/ "DSC_4700[1].JPG")
![DSC_4701[1].JPG](https://www.forabodiesonly.com/mopar/attachments/dsc_4701-1-jpg.1715796525/ "DSC_4701[1].JPG")
![DSC_4697[1].JPG](https://www.forabodiesonly.com/mopar/attachments/dsc_4697-1-jpg.1715796526/ "DSC_4697[1].JPG")
![DSC_4702[1].JPG](https://www.forabodiesonly.com/mopar/attachments/dsc_4702-1-jpg.1715796528/ "DSC_4702[1].JPG")
The MS9935 gasket set just showed up. They are definitely different than what is shown in post #1. Very glad I reached out to the list for input on this intake installation, I didn't have a good feeling about the first set. These fit very nice, and they self locate by resting on the tabs that stick out from the head gaskets. The cork gaskets are identical to the 340/360 set I have. Notice that the U shaped head opening above the exhaust gas port is not covered by the gasket. Evidently it just remains open, doesn't seem to lead to anything, so I guess it doesn't need to be sealed. The top photo is the intake gasket from FS 8553 PT-10, above the MS9935 intake gasket from the set I just received.
