[Found!] Complete 4 Speed conversion

-
Status
Not open for further replies.
plumkrazee70

plumkrazee70

Well-Known Member
Joined
May 5, 2013
Messages
3,738
Reaction score
1,435
Location
Medford, Oregon
Rating - 100%
7   0   0
Contact seller
I am looking for a complete 4 speed conversion for my 70 Dart 340. It can be 23 spline or 18 spline OD or Non-OD. As long as all the parts (or close to) are there.

I've pmd one member who has one up for sale, but haven't heard back. Just seeing what's out there. I am in Medford, Oregon.

Thanks
 
Yes that was the one I was thinking about. How are you a member for so long and not have any or many posts? I see that often.
 
72dustervs said:
$1200 would be nice but highly unlikely , maybe 15 years ago
Click to expand...

I disagree. There is a member 4 hours away from who has everything, but a bell housing for $1100 asking. I was hoping to find something complete, so I wouldn't have to chase any more parts.
 
plumkrazee70 said:
I disagree. There is a member 4 hours away from who has everything, but a bell housing for $1100 asking. I was hoping to find something complete, so I wouldn't have to chase any more parts.
Click to expand...
If you found that for $1100 you better buy it as prices are all over an usually higher , I bought a fully rebuild a833 with bell housing shifter an linkage ,zbar for $2000 , granted it was rebuilt , but still had to buy the clutch pedals separately and proper shifter for console and will still need the smaller stuff like bushings ,,most bell housings are $400 by themselves
 
72dustervs said:
If you found that for $1100 you better buy it as prices are all over an usually higher , I bought a fully rebuild a833 with bell housing shifter an linkage ,zbar for $2000 , granted it was rebuilt , but still had to buy the clutch pedals separately and proper shifter for console and will still need the smaller stuff like bushings ,,most bell housings are $400 by themselves
Click to expand...

He is out of town until the 20th. I've seen bell housings from $200-300
 
I would highly suggest calling Brewer's Performance. They will sell you a complete kit with everything you will need. It will be more expensive, but the parts will be guaranteed.
 
plumkrazee70 said:
He is out of town until the 20th. I've seen bell housings from $200-300
Click to expand...
Yea so have I but prices vary all the time depending on seller , I have seen a few on marketplace worth the money around $150 to $300 but other places higher as bell housings are bringing more than they use to , wish I had all the ones I use to have and sold for nothing back in the day
 
not a clue; Probably a lot .......
Google says 2700/2800 km (about 1700 miles) and 28+ hours one way.
On a pallet, I'd guess about 250pounds. I could put the gears into an aluminum case for ya, and that would save about 30 pounds I think.
I'm only 30 miles inside Canada, but Not vaxed and won't ever be if I can prevent it, so cannot go into the USA. But I might be able to hire someone to run it to; Connies Depot, 1800 hwy 32N, Walhalla ND 58282; and ship it from there. OOPs I see it has had a name-change,to; The Parcel Barn. same address.

You can reach them;
by phone at: 701-549-3749.
fax number is: 701-549-2403.
Or email: parcelbarn@gmail.com
 
Last edited:
AJ/FormS said:
not a clue; Probably a lot .......
Google says 2700/2800 km (about 1700 miles) and 28+ hours one way.
On a pallet, I'd guess about 250pounds. I could put the gears into an aluminum case for ya, and that would save about 30 pounds I think.
I'm only 30 miles inside Canada, but Not vaxed and won't ever be if I can prevent it, so cannot go into the USA. But I might be able to hire someone to run it to; Connies Depot, 1800 hwy 32N, Walhalla ND 58282; and ship it from there. OOPs I see it has had a name-change,to; The Parcel Barn. same address.

You can reach them;
by phone at: 701-549-3749.
fax number is: 701-549-2403.
Or email: parcelbarn@gmail.com
Click to expand...

How much you thinking for the parts and what all do you have? You can PM if that's easier.
 
I've got a buddy with a complete setup here in Fresno if you want to take a drive. I'll call him and ask how much if you are interested.
 
Just talked to my buddy. 70-71 A-body 4-speed, floor hump, and shifter for $800. He's got a guy supposed to heading down from San Jose on Sunday to look at it. I'll pm you my number as I'll be away from the computer most or all of the day tomorrow.
 
AJ/FormS said:
I wish my wife of 44 years was still 105 pounds, and in the condition she was in before the babies messed her up...... lol
Click to expand...

HahahahahahahahahaHahahahahahahahahaHahahahahahahahahaHahahahahahahahahaHahahahahahahahahaHahahahahahahahahaHahahahahahahahahaHahahahahahahahahaHahahahahahahahahaHahahahahahahahahaHahahahahahahahahaHahahahahahahahahaHahahahahahahahahaHahahahahahahahahaHahahahahahahahaha.......
Forget the 105,135 would still be great and she doesn't think she the finance Minister as well...
MAPS
 
Status
Not open for further replies.
-

Back
Top