67/68/69 cuda dilemma
Today turned out nice again. No rain. I did my final sand blasting and going over that RH inner fender again. Mixed up a pint of Kirker epoxy primer, and hit it. It's not real thick as there will be bodywork that needs to be done in there, followed by sanding primer. I just wanted to seal the bare metal with a thin coat of epoxy to prevent flash rust.
Today turned out nice again. No rain. I did my final sand blasting and going over that RH inner fender again. Mixed up a pint of Kirker epoxy primer, and hit it. It's not real thick as there will be bodywork that needs to be done in there, followed by sanding primer. I just wanted to seal the bare metal with a thin coat of epoxy to prevent flash rust.