CARBON KEVLAR PADS AND SHOES

-
BergmanAutoCraft

BergmanAutoCraft

FABO Vendor
FABO Vendor
Joined
Feb 18, 2013
Messages
522
Reaction score
551
Location
Hampstead, NC
I'd like to know if anyone would be interested in pads and shoes lined with modern carbon/kevlar material. This has a much higher friction coefficient and temperature tolerance than typical parts on the market. Pads can be pin or slider, shoes can be 9,10 or 11.

Please PM me your name and email so I can keep track of interest.

Thanks FABO!
 
Last edited:
All stock replacement parts. Approx 100 per set of pads and shoes. Low to moderate dust depending on usage.
 
pads with more grip/initial bite that standard replacement or Something like hawk HP PLUS ? I have hawk on all 4 corners with disc.
 
silverex said:
pads with more grip/initial bite that standard replacement or Something like hawk HP PLUS ? I have hawk on all 4 corners with disc.
Click to expand...
Different material than the Hawks but available for stock mopar pads and shoes. Same idea, higher performance and temp rating.
 
Do they take heat to work? some carbon fiber type brakes need to heat up before they work.
 
How tough are they on the rotors and drums? Personally, I'd rather replace pads and shoes with softer friction materials more often than to have to get new hard parts.
 
These have good bite when cold as well. They haven’t been any tougher on the rotors and drums than anything. At an average of 3,000 miles per year, I don’t think wear really becomes an issue.
 
You must log in or register to reply here.
-

Back
Top