FUEL IN TANK PUMP ACCESS

clementine said

View attachment 1715806921 You might be able to see them now. I did cut right along the 'doubled up' part of where the metal for the header comes together and am considering tacking it in a few places to sew it up. Ill make a piece and tech screw it in place for a cover. I have just enough room to come straight up if I have to access pump.


A couple side note questions if I may.....

Run a relay for this pump ya? Battery is in trunk so no problem, just have to wire a switched power to her.

Where do I run the tank vent up to?
where do I run the battery box vent to?

RAWK ON FABO!!!

Click to expand...

The photo from
clementine is exactly how mine looks also. Except that I rounded the corners to not have stress concentrators. An easy way to do that is to drill a 3/8 inch hole at each corner prior to doing any cutting. Then use the metal saw of your choice to connect the holes back toward the mid point to the outer edge of the hole so you end up with a nice radius. File off any sharp edges.
On the fuel out and return connectors. I am running the same size fuel line and connectors on both sides, I put a drop of paint on the fuel line out connector and the pump connector, to make it easy to match them up correctly if I am in there for a repair. So one pair that go together are marked and the other pair are not.