There have been quite a few threads on here lately about how best to finish your intake manifold. Mainly as a Thank You to all of you who tag me in these threads, I've decided to help sway your decision when it comes to finding the right place to do it.
From today until November 15, 2021, I will deduct $50.00 off the Labor Total on every intake manifold that arrives at my shop!
The FAQ section on my website is tailored to new customers and is the best place to start when considering PSC for your refinishing needs. There is even a Quote Request Form on there you can use if you wish (it, along with the photos you provide, supplies all the info I need to give you the most accurate quote).
A few examples are shown below if you have never had an opportunity to check out my past work over the last 15 years with even more on my website Gallery. Most prefer to replicate the look of brand new aluminum while others like to match the engine color. My supplier has literally thousands of powder colors to choose from and I have a large number of Mopar-matching powders already in stock to turn your idea into reality.
Unlike your local guy who merely colors what you present, I devote the time and effort necessary to get the metal as close to perfect as possible before any powder starts flying. Each cast aluminum part is a unique piece -- some are smooth, some are bumpy, and most are a combination of both so I strive more for uniformity than outright perfection. Straight up though as always, intakes are one of my favorite things to restore and customize.
With the Fall Teardown Season approaching, it can get pretty crazy around here over the winter so the sooner you get it to me the sooner it will be finished.
Don't hesitate to Start a Conversation or give me a call after 10:00 a.m. Central U.S. time if you want to go over the basics or have any particular questions.
Before:
After:
Before (for the Richard Petty Museum by the way ...):
After:
It's been a pleasure being a part of FABO for all these years and YOUR SUPPORT is the only thing that's kept my doors open since 2007! This is my way of Paying It Forward a little.
I look forward to working with you! Thanks for taking a moment to read this and check out some of my past creations.
From today until November 15, 2021, I will deduct $50.00 off the Labor Total on every intake manifold that arrives at my shop!
The FAQ section on my website is tailored to new customers and is the best place to start when considering PSC for your refinishing needs. There is even a Quote Request Form on there you can use if you wish (it, along with the photos you provide, supplies all the info I need to give you the most accurate quote).
A few examples are shown below if you have never had an opportunity to check out my past work over the last 15 years with even more on my website Gallery. Most prefer to replicate the look of brand new aluminum while others like to match the engine color. My supplier has literally thousands of powder colors to choose from and I have a large number of Mopar-matching powders already in stock to turn your idea into reality.
Unlike your local guy who merely colors what you present, I devote the time and effort necessary to get the metal as close to perfect as possible before any powder starts flying. Each cast aluminum part is a unique piece -- some are smooth, some are bumpy, and most are a combination of both so I strive more for uniformity than outright perfection. Straight up though as always, intakes are one of my favorite things to restore and customize.
With the Fall Teardown Season approaching, it can get pretty crazy around here over the winter so the sooner you get it to me the sooner it will be finished.
Don't hesitate to Start a Conversation or give me a call after 10:00 a.m. Central U.S. time if you want to go over the basics or have any particular questions.
Before:
After:
Before (for the Richard Petty Museum by the way ...):
After:
It's been a pleasure being a part of FABO for all these years and YOUR SUPPORT is the only thing that's kept my doors open since 2007! This is my way of Paying It Forward a little.
I look forward to working with you! Thanks for taking a moment to read this and check out some of my past creations.
