273 adjustable rocker conundrum..

I do have an extra set of 273 adjusters from the first set I had and that's what I was actually doing at first before I found out the crane ones would fit. And I was going through them and it did seem to make a difference when I changed the adjusters.. from one side it seemed four of them I could almost not even turn them and then the other four so I grabbed some of my old adjusters and we're trying some and some spun in and some were much tighter and I left those ones in... Of course I stopped that process when I finally took one out of the crane rocker and screwed it into the 273 rocker and that's what I'm going to end up doing...
So today after I take care of some home stuff I'm going to resort all my rockers face the front of all the 273 rockers face the tops of the adjuster pad clean them all up put them on each side and space them with shims so they only have about 20 to .015 clearance side to side put these rockers on put the push rods in adjust them all and call it a day.