So sorry I didn’t look into this when you posted it up. I’ve been doing homework for another on a Mallory VII box. That was a little tuff to find. But Jegs had the schematics.
WIRING PROCEDURE
SERIES NOS. 84 AND 32 (SINGLE PICKUP)
There is a female connector with two wires coming from the distributor:
• Connect the distributor wire harness to the female connector and
route the harness two wires to the electronic ignition control.
• ORANGE-WIRE-(MAG+): Connect to the magnetic input
(MAG+)-terminal or wire on the electronic ignition control.
• PURPLE-WIRE-(MAG–): Connect to the magnetic input (MAG–)
terminal or wire on the electronic ignition control.
I was calling the Dist wires Red and Violet but I guess they could be Orange and Purple. If true... Orange would go to Green on the box and Purple to the Black ?
