AirGap under a stock hood
Holley Strip Dom, with a 1" spacer ( since removed), 750 vac... plenty of clearance. Made a " cold air " unit ..
Design from FABO! (408demon, N-96, one of none) I hope I'm right on that. It's a 3 inch cake pan...does Not hit... only the open top element touches the hood skin...and that is getting " The Blade".. if you look at the frame, it actually Has, a radius ( kinda stamped, or Pushed in) looking indent.... like the engineer wanted room, for.... A big *** intake! I think You will have room! I couldn't get an offset center base, that was dropped. So it's a flat base, has 3" filter too
Holley Strip Dom, with a 1" spacer ( since removed), 750 vac... plenty of clearance. Made a " cold air " unit ..
Design from FABO! (408demon, N-96, one of none) I hope I'm right on that. It's a 3 inch cake pan...does Not hit... only the open top element touches the hood skin...and that is getting " The Blade".. if you look at the frame, it actually Has, a radius ( kinda stamped, or Pushed in) looking indent.... like the engineer wanted room, for.... A big *** intake! I think You will have room! I couldn't get an offset center base, that was dropped. So it's a flat base, has 3" filter too
