Heater Hose Inner Fender Routing - 71 Demon 340
From the factory there is a plastic strap with a push lock built on it. To simulate that if you cannot find one.
Take a black zip tie and push it through the hole from under the fender into the engine compartment. Then around the hoses and back out through the same hole. Connect the zip tie and the lock will be on the outer side of the fender well and hold the hoses up in place.
The hoses hang on the strap. They never came with a metal bracket. You will need the stand that holds them off the valve cover. Here are a couple of pictures of how they are routed. This is a 71 with a early 69 style carb and air breather.
The strap in these pics is a factory push strap. They are reusable if you know how to remove them.
From the factory there is a plastic strap with a push lock built on it. To simulate that if you cannot find one.
Take a black zip tie and push it through the hole from under the fender into the engine compartment. Then around the hoses and back out through the same hole. Connect the zip tie and the lock will be on the outer side of the fender well and hold the hoses up in place.
The hoses hang on the strap. They never came with a metal bracket. You will need the stand that holds them off the valve cover. Here are a couple of pictures of how they are routed. This is a 71 with a early 69 style carb and air breather.
The strap in these pics is a factory push strap. They are reusable if you know how to remove them.
