Magnum engine swap

-
Eric Pearson

Eric Pearson

73purpule duster
FABO Gold Member
Joined
Dec 23, 2016
Messages
110
Reaction score
95
Location
Houston Texas
Good evening everyone. I’m looking for some advice on what someone is using for the hose that goes from a eldelbrock air gap manifold to the large port on a LA style water pump. The outlet on the air gap manifold is straight whereas the other manifold has one that is angled. Thanks for the help
 
Eric Pearson said:
Good evening everyone. I’m looking for some advice on what someone is using for the hose that goes from a eldelbrock air gap manifold to the large port on a LA style water pump. The outlet on the air gap manifold is straight whereas the other manifold has one that is angled. Thanks for the help
Click to expand...

E36DD129-7DCD-4B88-8B70-6CC3A8DE889A.jpeg
 
I took my LA hose to the parts store along with my digital calibers (Magnum is larger on the intake side) and asked if I could go back to find one. Took me 3 trips to find one that works. Sure hope it lasts cause I didn't write the number down!

Edit: it's slight creased on the bend, but not bad.
 
Heres the stock mopar 340 bi-pass hose I used.

Enlarge pic for part #.

Cheers!


img_0597-jpg.jpg
 
You must log in or register to reply here.
-

Back
Top