I need help finding the wire that goes to the pin on the manifold near distributor...

Also, my manifold/Holley took a tumble off of my work bench when the whole assembly was off the engine and now fuel is leaking from that large screw on the top front of the Holley. It's a 570 cfm Avenger if anyone might know why it's doing that.[/QUOTE]

The big screw is where you set your float level in the carb. The screw is loosened and then you can turn the nut until the fuel in the bowl is at the bottom of the check hole on the side. This done with the engine running at idle. You may have just knocked the screw loose try tightening it up.