Gauge voltage and Fuel relay with AA classic install

Thanks @67Dart273 and @4spdragtop! I just came upstairs from wiring in a relay that is back by the pump. I haven't taken out the 'factory' Holley one, but will....maybe. May just leave it. Im trying not to cut up the wires so if (when) I do have a problem I can diagnose easier.

I did go through the gauges before putting in the dash and have new printed circuit boards (that I tested), so things are pretty new under there including ALL the wiring. Ill probably swing out the dash though and see if I can service that fuel gauge. It shouldn't be that big of a deal since the windshield is out and the frame is held in by two bolts at this time. I did flip the 'catch nuts' and will be fastening the dash frame from the underside in case there is a future need to access/remove dash.

Ill probably have to check in with you to decipher your words or just re read. Im pretty tired from a day of wrenching. gettin old. Painted the wheels on Heidi's truck and put new rubber on them, combined with finishing the fuel pump access hole and wiring up the relay took waaaaaay more time than expected!