Windshield install advice.

Any glass i have installed i used the rope trick.

Put window seal on the glass. Use whatever sealer you prefer in the grove that the glass goes into.

Take a thin cord (like clothes line or smaller)and put it in the grove of the seal that will go over the body pinch weld seam.

Put the glass in over the lower pinch weld seam. Have someone put pressure on the glass from the outside, not a lot, just enough for the seal to stay in contact with the body. Pull the cord into the car, preferably from bothsides at the same time.

If you lined everything up correctly the rope will pull the inside of the seal into the car over the body pinch weld and the glass will be centered.

DO NOT SLAP THE GLASS there is no need to do that and you stand a better than average chance of breaking the glass.

If you need to add sealer to the seal and body pinch weld you can add that after from the outside.

I am no expert but that is how i have installed glass.