[SOLD] 18 Spline 4 Speed

-
Status
Not open for further replies.

plumkrazee70

Well-Known Member
Joined
May 5, 2013
Messages
3,736
Reaction score
1,432
Location
Medford, Oregon
Rating - 100%
7   0   0
Contact seller
I have a 18 spline 4 speed with a b body tailshaft. You'll need an A body tailshaft and main shaft to have it install in an A body. You can also use a B/E tailshaft and modify the shifter mounting location for A body. I picked this up with the intention on using it in my 70 Dart, but found a complete A body setup, instead.

It turns freely, and visually it looks great, but that is the extent on what I know.

I will put it on a pallet and build a crate around it and ship it FedEx Freight.

Looking to get $1,800 SHIPPED to the lower 48 OR $1,500 picked up.

IMG_20210918_064535.jpg


Resized952021091595102411001.jpg


IMG_20211114_141047.jpg


IMG_20211114_141052.jpg


IMG_20211114_135650721.jpg


IMG_20211114_135637075.jpg


IMG_20211114_135659276.jpg


IMG_20211114_135714388.jpg


IMG_20211114_135721722.jpg
 
The 66 and 67 came with the small bearing retainer. I suppose the 66 Hemi cars and the 67 HP 440 R/T and GTX and the Hemi again.
 
The 66 and 67 came with the small bearing retainer. I suppose the 66 Hemi cars and the 67 HP 440 R/T and GTX and the Hemi again.

Gotcha. This case is late 69 case. The bearing retainer number is visible in my pics. I'm pretty sure I ran it against Jamie Passon book numbers.
 
Status
Not open for further replies.
-
Back
Top