Sure Grip Questions

-
crewchief

crewchief

A & P Mechanic
FABO Gold Member
Joined
Jan 17, 2014
Messages
656
Reaction score
365
Location
Malta NY
1. Will a SG from a nine bolt 7 1/4 work in a ten bolt?
2. Are there rebuild kits out there for the SG?
 
Can't answer your 1st ?
Rebuild, if it's a cone type, no. Clutch type, yes.
 
Here's what I have.
Diff.jpg
 
This is the cone type I just took out of my Dart and will replace it with a Yukon clutch type. Well, picture won't load again . If you want, pm me your email and I'll send it. Otherwise, I am sure someone can get you a picture.
 
Still not sure if there's a difference between 9 bolt vs 10.
CRUZE 418 said:
This is the cone type I just took out of my Dart and will replace it with a Yukon clutch type. Well, picture won't load again . If you want, pm me your email and I'll send it. Otherwise, I am sure someone can get you a picture.
Click to expand...
Thanks for the pic, clears that up.
 
If I understand the question. You have what I call a hybrid 7 1/4” with BBP and C clip axle? If so, no it won’t work as the axles are held in bolts on the standard 7 1/4. And the later model hybrid rear has C clips holding axles in. If we are talking about the same thing.
 
SGBARRACUDA said:
If I understand the question. You have what I call a hybrid 7 1/4” with BBP and C clip axle? If so, no it won’t work as the axles are held in bolts on the standard 7 1/4. And the later model hybrid rear has C clips holding axles in. If we are talking about the same thing.
Click to expand...
She's was a 73 318 auto now a 340. Couldn't confirm anything about the axle, never been apart since new.
 
Well if you can post a picture of both rear ends, maybe I can tell you what you have. What is it your trying to do?
 
I only have a pic of the donor 9 bolt axle from a 68 Barracuda (shown above). I want to use the SG from that axle for my 73. Need a kit before installing it, if it will work for me.
 
No, this is the best pic I have right now. She's in bed for the winter.
 
You must log in or register to reply here.
-

Back
Top