[SOLD] /6 truck bellhousing

-
Status
Not open for further replies.
Princess Valiant

Princess Valiant

A.K.A. Rainy Day Auto
Joined
Dec 14, 2011
Messages
26,089
Reaction score
22,936
Location
Colorado
Rating - 100%
47   0   0
Contact seller
I have a bellhousing from a 70 D 100 with a slant.

No cracks and the motor mounts are included.

$75. Plus shipping from 81005

20211115_190332.jpg


20211115_190335.jpg
 
Princess Valiant said:
Still available
Click to expand...
Adding a comment so folks know what that bell housing can do. And I believe that I have this correct.
All other stock slant six bell housings will only accept a 122 tooth flywheel. That severely limits the available clutch and pressure plate packages.
The slant six NP 435 flywheel housing will accept a 130 tooth flywheel. The 130 tooth flywheel is used on the small block Mopar so there is a huge assortment of performance clutches available. But nothing is really free because the NP 435 transmission is truly a truck transmission and is not performance oriented. But if there was a way to get an a833 mounted to that bell housing, that could be a sweet package.
 
my68barracuda said:
Adding a comment so folks know what that bell housing can do. And I believe that I have this correct.
All other stock slant six bell housings will only accept a 122 tooth flywheel. That severely limits the available clutch and pressure plate packages.
The slant six NP 435 flywheel housing will accept a 130 tooth flywheel. The 130 tooth flywheel is used on the small block Mopar so there is a huge assortment of performance clutches available. But nothing is really free because the NP 435 transmission is truly a truck transmission and is not performance oriented. But if there was a way to get an a833 mounted to that bell housing, that could be a sweet package.
Click to expand...
All that is true except the 130 tooth flywheel part. It's actually a 143 tooth flywheel for the 11 inch clutch. It's really heavy duty.
 
I have one just like it for a small block I will swap straight across.
 
RustyRatRod said:
I have one just like it for a small block I will swap straight across.
Click to expand...

WTH!!! are you reading my mind, I need one for a SB

How do we do this, i can get mine shipped in the next couple days, maybe tomorrow but no promise on that because i have to find a box
 
Princess Valiant said:
WTH!!! are you reading my mind, I need one for a SB

How do we do this, i can get mine shipped in the next couple days, maybe tomorrow but no promise on that because i have to find a box
Click to expand...
Lemmie go lay my hand on it. brb
 
Here it is. You showed me yours now I'm showin you mine. Don't tell Kitty though. LOL It'll need cleanin up cause the aluminum has a little corrosion on it, but it's in good shape.
DSCF1704.JPG
DSCF1703.JPG
 
Princess Valiant said:
Nice!! Good looking parts you have there lol

Is there a casting numero ?
Click to expand...
There's a piece of one, but I cannot make it out. It doesn't have big "holes" for the casting number like the one you have. You can see the small holes and it's in one of those but I can't make the whole thing out. If you really just gotta have it, I'll go back out with a magnifying glass and see if I can read it for you.
 
RustyRatRod said:
There's a piece of one, but I cannot make it out. It doesn't have big "holes" for the casting number like the one you have. You can see the small holes and it's in one of those but I can't make the whole thing out. If you really just gotta have it, I'll go back out with a magnifying glass and see if I can read it for you.
Click to expand...
ok, don't matter, it looks Great.

PM me your address and i will get on this first thing in A.M.
 
Oh and that's not a hole in the top....well I mean, it is, but it's a factory hole for using a timing light to hit the flywheel on a truck. That's how some of them checked timing.
 
memike said:
Mark this thread sold if indeed its gone to RRR in trade.
Click to expand...
I believe we've reached a deal on it, Mike. I'm sure she'll respond in her waking hours. Not everybody's a vampire like I am . lol
 
Status
Not open for further replies.
-

Back
Top