Snap Ring Pliers Wilde G409NP

-
C

CudaFactHackJob

Well-Known Member
Joined
Mar 17, 2016
Messages
2,623
Reaction score
1,154
Location
Hemet, Ca.
I think I might have found the world's greatest snap ring pliers for removing retaining rings in clutch drums. It should be here within a week and I'll know for sure. Anybody already try these or have recommendations? I used to use a K-D tool but can't find it anywhere.
 
I found some Snap-ons for $70 with shipping on ebay, but do they have the small recess near the tip like the Wilde's? I got these for $20 with shipping.
 
CudaFactHackJob said:
I found some Snap-ons for $70 with shipping on ebay, but do they have the small recess near the tip like the Wilde's? I got these for $20 with shipping.
Click to expand...
Mine have the small recess also. It’s been to long for me to remember how much I gave for them . I would bet those will work real well for you though
 
The K-D's I had didn't have the recess; just a bunch of grooves that didn't do a very good job of holding the ends in place; slipped off a lot.
 
CudaFactHackJob said:
I think I might have found the world's greatest snap ring pliers for removing retaining rings in clutch drums. It should be here within a week and I'll know for sure. Anybody already try these or have recommendations? I used to use a K-D tool but can't find it anywhere.
Click to expand...
Let us know how it works out. Pics would be nice.
 
..

This thread is useless without pics.gif
 
Google it if you are REALLY interested...I've NEVER posted a pic on here; and I probably never will...
 
Maybe this? Doesn't say this is the particular model, just a close up of either the good tip or the bad K-D tip.
s-l400(2).jpg
 
Those are lock ring pliers. Snap ring pliers have pin style jaws that's why I asked for a photo.
 
OP has wrong part number or wrong description. If he's pulling clutch drum rings maybe he's not using a snap ring plier to do it?
 
With a name like ""TOOLMAN MIKE"...oh forget it. Wrong part number Pista? Still know you're right? Would somebody please ban me to keep me away from these idiots? IF I don't get banned, somebody just slap me the next time I try to help.
 
Oh now this thread comes up.:wtf:

This morning on Amazon I purchased a pair of parallel jaw lock ring pliers stanley proto j251g for a transmission job. Hoping they work good.
 
toolmanmike said:
Those are very good.
Click to expand...
I carried a half dozen different designs on the tool truck and the one you bought was always popular as well as the one pictured above. We had 3 designs of that one. One with the ear like pictured and one without.
 
You must log in or register to reply here.
-

Back
Top