Speedmaster sale. It started

pittsburghracer said

The PRW rockers with bushing appear to be one of the better of the cheaper brand rockers. I’m not sure what the lower priced Harland Sharp rockers are selling for. I sure wish I would have bought about 500 set of the old Crane and Isky rockers that we ran on almost everything years ago. Banana groove the shafts and we beat the piss out of them.

Click to expand...

HS are going from $830 to $900 depending on which exact kit.

I had a set of PRW 1.5 alum rockers on my RHS 'X' heads prior to the TF heads, and they did not line up well on the valve stems of the TF heads. They were WAY to the intake side, and swept clear across to the center of the stem at full lift (around .600 lift). The stainless 1.6 rockers landed close to center, and the sweep was decently narrow and didn't sweep much from 1/2 to full lift either. 3/8 pushrods also fit with no grinding, but I had to be super careful with the shimming of the rockers.

Speaking of the shims, I did find that I had to get creative. I think the stands on the TF heads are wider than they were on my RHS heads, and some of the thicker spacers didn't fit like my original setup and took a stack of 3-4 shims of varying thickness to get adequate clearance. That was my only real gripe about the whole setup.