hotrod swinger
Well-Known Member
Anybody tell me who manufactures these wheels and the model name?
Please identify these wheels
- Thread starter hotrod swinger
- Start date
-
American Racing AR62 Outlaw II
You can get them in 5 x 4 bolt pattern in 14" rim or 5 x 4.5 in 15'' and 16" rim.
You can get them in 5 x 4 bolt pattern in 14" rim or 5 x 4.5 in 15'' and 16" rim.
LocuMob
Fluid Technician
Looks to be both AR62 up front, and Convo ET's on the rear. Couldn't find a picture of anything narrower than a 15x8" Convo ET, those had the ribs inside. A 15x7" Convo Pro also had the ribs.
Count the holes... the wheels in the two photos have a different number of holes...
LocuMob
Fluid Technician
33IMP
Well-Known Member
Well, the rears are certainly centerline pro-stocks, convo version. I thought the fronts were centerline pro-stocks too, because of the dual pattern, but.....
I compared to my centerline 15x4 pro stocks (which also have the dual pattern) but mine have 14 large holes, yours show ten. Design change?
Centerline pro-stocks have been out of production for years even before Centerline Tool folded.
I don't know who is making "centerlines" now, I suspect china.
Edit: my centerline pro-stocks rears have 14 large holes too, they are not the convo version.
I compared to my centerline 15x4 pro stocks (which also have the dual pattern) but mine have 14 large holes, yours show ten. Design change?
Centerline pro-stocks have been out of production for years even before Centerline Tool folded.
I don't know who is making "centerlines" now, I suspect china.
Edit: my centerline pro-stocks rears have 14 large holes too, they are not the convo version.
Scamp Rhonda
Well-Known Member
I thought about the AR62 for the front, but if you look at the holes in the original posters picture, it looks like a thinner stamped steel material, not the much thicker material you would see used on an aluminum wheel.
- Joined
- Apr 16, 2009
- Messages
- 4,139
- Reaction score
- 5,944
I actually have some Enkie wheels real close.
-
