When you install windshield and rear glass, where do you put sealant? Given the intermittent nature of the bottom fence on the front, I am guessing sealant there. I was under the impression that sealant goes on both sides of the gasket.
I used the sealant inside the gasket where it seals to the pinch weld all the way around into the bottom corners except between the drains ..I used 5/16 butyl tape there..pressing it down flat with the windshield in the gasket.
I already popped the trim on but I think I'm going to pull it ' it's got to be buffed anyways'.. and then run butyl tape all the way around metal to seal over the clip screws and backup the corners to keep water from building up and rust and to reinforce the trim ..especially in the corners.
No sealant between glass.
Forgot to mention that it rained on the car for 2 days and no leaks.
