George Lawicki Well-Known Member Joined Oct 20, 2019 Messages 177 Reaction score 52 Location Cleveland OH Dec 12, 2021 #1 Hey guys just want to confirm the correct installation position for the wheel seal on my 74 Dart factory disc brakes
Hey guys just want to confirm the correct installation position for the wheel seal on my 74 Dart factory disc brakes
Tech857 Well-Known Member Joined Jun 29, 2012 Messages 238 Reaction score 92 Location NH Dec 12, 2021 #2 The rubber lip is towards the spindle. Red metal is towards the rotor and bearings.
Professor Fate Push the button, Max... Joined Jan 13, 2020 Messages 6,491 Reaction score 11,308 Location Wisconsin Dec 12, 2021 #3 Your second pic shows the actual "lip" that seals the bearing. It goes toward the bearing. Pack the backside of the lip with grease prior to installing the rotor to the spindle.
Your second pic shows the actual "lip" that seals the bearing. It goes toward the bearing. Pack the backside of the lip with grease prior to installing the rotor to the spindle.
67Dart273 Well-Known Member Joined Oct 14, 2010 Messages 60,035 Reaction score 33,295 Location Idaho Dec 13, 2021 #4 I'm not even sure that design will go in backwards--hit the bearing cone? Not all seals have that design.
I'm not even sure that design will go in backwards--hit the bearing cone? Not all seals have that design.
flingdingo Well-Known Member Joined Apr 26, 2017 Messages 429 Reaction score 381 Location El Lay Dec 13, 2021 #5 We always cut that outer lip off at the shops I worked at. I've never seen a factory seal with one.