The clips on the inner fender are the same on all 67 a-bodies, the plug wire retainers on the valve covers are the standard type used in 67 on both the 2bbl and 4bbl. Hose clamps are the standard Corbin clamps. The heater hoses run over the valve cover, there is a piece of heater hose used as a spacer held on with an aluminum strap (I have a non factory bracket holding the hoses), that hose spacer should go under the hoses. Although I have converted my car back to 2bbl I have done the research on some original Commandos.
On the driver side the plug wires use a comb to hold them mid span. On the other side it is a round/square one.
Often missing is the clip for the horn wire on the alternator.
Should have the metal style PCV valve.
View attachment 1715837001
(ignore the mismatched plug wire clips on the valve covers, that was a 2bbl thing)
View attachment 1715837005
View attachment 1715837006
Alan
