Allstar Performance ALL54224 Throttle Cable Bracket

Thought I should update this thread. After messing around with this bracket for a couple of weeks, I finally gave up on it. It has a major design flaw imo and pointed out by RRR. The carb throttle linkage moves in an arc. This bracket has the cable mount positioned higher than the normal stud location on the carb. So it is impossible to get fully WOT. The only way to do it is having a custom stud made that will attach the cable to the same point as the throttle return spring setup like Demonx2 shows in his pics. I looked high and low trying to find a stud that would work to no avail.

Ended up writing a descriptive message to Summit, where I bought it. They agreed that either the cable hold down needs to be positioned lower, or they need to manufacture and include a stud that will allow the cable end and return springs to attach in the same location. So even though I had ground out the cable slot, Summit refunded my total purchase price and is sending it back to Allstar with a full description of the problem. Huge kudos to Summit for doing this even though I have doubts Allstar will make any changes.