I have The High Offset *(+45MM) Bullitt Wheels on my car for street use.. 17X8 - 245 45 17's Since I have a '69 B Body Rear in there I actually machined the Rear wheels to +52mm for Clearance on the outer Wheel Lip ('67 B Body Axle in the works to solve this)...Here's what that looks like:
View attachment 1715837791
Here is some info on my Enkei's...
I ordered 17x8 (+45mm) for the front and 17X7.5 (+48mm) for the rear.
1964 Dart Grüne Hölle Road Course AutoX Car IRWIN PA - Page 20 - Slant Six Forum
They are super Light and look good too.
View attachment 1715837792
You have to install 3" long wheel studs around the car and play with spacers (Sometimes as large as 1.5") and the modern +32MM- +48MM wheels will work fine.
I drove 1,000's of miles this summer on each with minimal front fender trimming / rubbing and -4 Degrees Camber and ~+6 Degrees Caster
