It's awesome still to see these back on the market.
Motech performance Murrieta, CaliforniaIs this Schumacher or someone else? I thought US cartool or another company was going to make them. Kim
Thanks!!! I thought it was in Cali. KimMotech performance Murrieta, California
That's strange, because that post is on Michael Schumacher's Facebook page. Not another company.
Beats me. It's all secret CIA stuff.Maybe the new place took over the FB page. Or they are still helping out the new place.
No doubt they work I would like to know if anyone has made it into the 10s with themI ran the Schumacher Tri-Y's on a 65 Belvedere with a 451 auto and 4.10.
I got laughed at (pittily 1 5/8 tubes) till I made it to the finals during a NSS race in St.Louis
Ran 11.90's @ 110 all day long. Full street trim.They work well.View attachment 1715837595
I've run a best time of 12.48@108 with them in my Duster with a mild 413.I ran the Schumacher Tri-Y's on a 65 Belvedere with a 451 auto and 4.10.
I got laughed at (pittily 1 5/8 tubes) till I made it to the finals during a NSS race in St.Louis
Ran 11.90's @ 110 all day long. Full street trim.They work well.View attachment 1715837595
Since there have been FAST Mopar wedges that have made it into the tens with exhaust manifolds and bias ply repro tires........I’d say I’m sure it can be done.......it just depends on how bad you want to get there.
Care to share the details on your combo?
A simple set-up that works. Motor is a 440 .30 over, 10.5 compression, Edelbrock RPM top end kit, intake is gasket matched, Chrysler chrome box ignition, Quickfuel 850 carb, Ebelbrock electric fuel pump, Electric fans and water pump, Hughes 3000 stall with a full manual reverse pattern competition 727, 8 3/4 rear with 4.10, S/S springs with Competition Engineering adjustable shocks front and rear. Mini tubbed with spring relocation kit. Disc brakes front and rear. Car has fiberglass bumpers, fenders, rear valance and hood. Car weight is 3000 Lbs. Motor picture is from a few years ago.Care to share the details on your combo?
Edelbrock cam?A simple set-up that works. Motor is A 440 .30 over, 10.5 compression, Edlebrock RPM top end kit, intake is gasket matched, Chrysler chrome box ignition, Quickfuel 850 carb, Eblebrock electric fuel pump, Electric fans and water pump, Hughes 3000 stall with a full manual reverse pattern competition 727, 8 3/4 rear with 4.10, S/S springs with Competition Engineering adjustable shocks front and rear. Mini tubbed with spring relocation kit. Disc brakes front and rear. Car has fiberglass bumpers, fenders, rear valance and hood. Car weight is 3000 Lbs. Motor picture is from a few years ago.
View attachment 1715841090
Yes, cam that came with the top end kit. Same motor for 12 years.Edelbrock cam?