Package tray installation
so here's info on the package tray buttons:
here are the buttons (2 for 1 tray)
Here is where they go (regardless if the tray has speaker holes or not). One on each side.
This was the tough picture - this is where they go through from the bottom. It's in the package tray metal support just outside of the speaker holes, behind the trunk hinges
If you have a new package tray there will be no holes for these. Get someone to hold the tray down from the top, go in the trunk and run a fine drill bit up through the holes in the metal to locate the holes on the tray and then remove the tray, drill the holes as big as the holes in the metal from the top with a piece of wood underneath. put the tray in place and press the buttons in
so here's info on the package tray buttons:
here are the buttons (2 for 1 tray)
Here is where they go (regardless if the tray has speaker holes or not). One on each side.
This was the tough picture - this is where they go through from the bottom. It's in the package tray metal support just outside of the speaker holes, behind the trunk hinges
If you have a new package tray there will be no holes for these. Get someone to hold the tray down from the top, go in the trunk and run a fine drill bit up through the holes in the metal to locate the holes on the tray and then remove the tray, drill the holes as big as the holes in the metal from the top with a piece of wood underneath. put the tray in place and press the buttons in
