Anybody have a '67 Barracuda with the correct steering wheel?

65 Cuda 340 said

Looks like the correct wheel to me except for the Dodge horn button. My 67 Charger had the same wheel, too, except it may have had a full horn ring. Been so long since I've laid eyes on it, I can't remember. I'd like to go back to the stock wheel on the Charger. Maybe will try to repair the cracks. ???

Click to expand...

I was sloppy with my application of PC7 and should have had some denatured alcohol around to wet a putty knife for final 'push in' of product. the wetted knife would have also been useful (as it doesnt stick to it with the alcohol) to clean up the mound. It has hardened and am now using a file to rough it into shape. Then Ill drop to 120# and 220# whatever I have laying around. Then its primer filler/sand/primer/sand/primer/wet sand/color/inspect/clearx3......should be a driver by then. Im kind of a hack, but seemingly a pretty good one? Time will tell.

Edit: prep work included getting into cracks to kind of 'V' them and rough/clean up the surfaces. as if you were gonna weld it. I used a dremel mostly. and a triangular file. The plastic kind of melts so a little grind here and there, then it cools and you can chip the slag off