Heads for a Magnum Stroker Engine

I have a 2000 magnum engine in my 91 dakota sport race truck. Has KB107 pistons but stock crank and rods. I am useing the new trickflow heads. Have a comp 550 lift solid flat Tappet cam with oil through lifters, PRW roller rockers and Smith brother oil through push rods. With my set upbi think I am right at 11.1 compression. You can run LA heads on a latter magnum block as long as you have .
Oil through lifters
Oil through push rods
Rocker arms that will low push rod oiling.
I forgot to list that I have Howard's EDM lifters, PRW bullet steel 1.6 rockers and Smith brother 3/8th push rods.