Cam

I put my reading glass on =
I have over 100 aftermarket camshafts
in my shop - You cam looks like a stock or
something not much bigger by looking at the lobes.
Certainly not something big.
Is it just a reflection in the light OR is the one lobe
in the picture starting to go flat. Hoping it is just the
picture = Once the Cam start to lose a lobe it goes South
in a hurry after that.

Speaking of stampings on the Cam = Look for cams with "CWC"
cast in the on the older stuff. It is a much strong casting material
and more tolerant of higher spring pressure which you usually need as
stock springs with a few exceptions (440/6 and Hemi) are pretty puny!