67 Fastback rear deck filler panel repair ?s

Look up a picture of an AMD full quarter, and you will see where the seam is. I agree; DON'T even try to reuse the gasket. In fact, when they get old and hard, you just about have to cut them out a little at a time with a utility knife and new, sharp blades. BE CAREFUL and wear good protection. If you try to pry the glass out with an old, hard gasket, you will likely break the glass. On the other hand, I have one I could sell you, so go ahead and break it. JUST KIDDING. Another thing, if you can weld, that will be an easy fix. I've been welding for years, but I recently found a guy on YouTube who shows you how to do all sorts of rust repair. I have learned a lot. You guys should all check him out. It is called Fitzee's Fabrication. In fact, he has a show on that exact repair.