drums pulling to the right

?? You "rebuilt" them and left the actual brakes "not?"

1...Did you for CERTAIN get the secondary and primary shoes on the correct position?
(Rear mounted shoes have longer lining than the front shoes)
2...Did you for SURE get the drums and shoes back on the same wheel they came off from?
3....You may have them adjusted uneven, that could cause one side to apply "late" but should "even" out some as you apply, unless they are grossly misadjusted
4....You may have one side adjusted too TIGHT causing it to heat up and lose braking effect compared to the opposite side

Do you have a service manual? If not wander over to MyMopar and download one--free.
well it started out as rebuilding the front end after blowing out my lower ball joint and was kind of in a rush because the dart is my only ride to collage at the moment. I do have the manual too.

1. I thought I put the shoes in the correct spot but now I'm doubting myself so I will pull the drum and check
2. I did not cross any of the parts kept them on different tables when rebuilding them
3. them both perfect at the moment but been messing around with the adjustment for a while even if I put the left side tighter it will still pull to the right.