Someone please help me

Just off the top of my head, your chrysler ECU needs to be solidly mounted to a ground. And one of us needs to send you a usable five pin connector and you need a four pin ballast resistor. Try grounding the ECU first, but I’m willing to bet it’s electrical issues at this point. Also, what did you set your static timing at?
So timing I have no idea don't have a way to tell, just turned it to a good running position and ran w it,took off the Lil black cap on the carb on the side of the bowl..had no affect, but the stutter when I barely press the throttle is gone..keep in mind it's cold enough to snow so that may have some affect, now my biggest problem..I think is the transmission, it's screaming at like 5k and I'm going 20 I added fluid, helped a Lil but can't even spin the tires...on ice..I've played with fuel and put 93 in, little more response but it still acts like there's a traction control on the engine, you have to slowly build speed no full throttle. Idk if it's the transmission or engine at this point