Yes. They come from the 10 pin connector and are "output' wires. So the 30/87/86 on the relay go to fan/fused 12V/switched 12V respectively, and then the '85' goes to the light blue on that 10 pin, if you have dual fans or 2 speed, run another relay for the green wire setup as well. You will set at what temp those turn on and off when you start car and have access to the 'wizard' setup/monitor thingy. A lot of the 10 pin wires I did not use. I think the only other one I used was the white one that runs to the ignition box.
