1970 Dart Accident and need fix up recommendations/ Advice!!

Bummer, is it leaking coolant also? (I see a puddle) you can buy new steel fenders, otherwise a good replacement is not hard to find. Hoods are getting a little harder to find but they are still out there, I think 70 is a one year only hood, 71 & 72 look identical but bolt on a little different where the hinges go, but they can easily be used. You need a fender extension, 1970 was also a 1-year part made of fiberglass, but a 1971 part can be used, they are metal. Your inner fender is gonna be tweaked some but I’m sure it’s an easy fix. Lower front valance under the bumper could be tweaked some since it bolts to the fender and might have pulled on it. You will also need the headlight mounting bracket and hardware. Your grille is damaged on the very end by the bumper but can still be used and not real noticeable when installed...hopefully where it bolts on in other places it didn’t break, they can be tough to find in nice shape but they do sell them new also. Bumper looks tweaked a little or maybe the grille is pushed back some? Possible you will need a upper grille support panel or I’m sure it could be straightened, hopefully your radiator support is fine, otherwise a little tug on that I’m sure it will be good. That side trim might be tough to match up, that’s not the factory trim. Side marker light could be bent a little bit they are tough so you should be ok.

If you were closer to Minnesota I could help you out with some extra parts I have! Sucks this happened but your car can be fixed! I wouldn’t remove any parts till a shop can look at it. You’ll have it repaired soon, good luck!
Thanks for this! I get out to Wisconsin for business, could do a side trip but getting the parts on the plane might be a bit of a pain! If
If you have a hard time locating parts I would suggest Wildcat Auto Wrecking. They are near Portland,Or, but they have a large inventory, and worth the drive.

https://www.wildcatmopars.com/
Oh man! thats a great suggestion! thanks and I'll look into it!