Stop in for a cup of coffee

-
Driveway cleared. Less than 2, but very heavy -almost slush point. Had to do the snowblower repair thing @Sublime one . Rubber blade TORO. I must not have tightened 2 of the center locknuts when I put new blades on. Lost them and blade jumped out of bracket. Was still working, but not right. Fixed that and it blasted away like new. Of course, their was a layer of ice underneath so salted that and will see if I can get some of that off before work.
 
9EEC9D5E-0F03-4D73-8DE3-D055F9AD3FDD.jpeg
E09D5D87-9E20-4AF4-888A-26D466DA0AAC.jpeg
 
71GSSDemon said:
I had wanted the velocity stacks on the tunnel ram, but it will be too tall to run the scoop even with just the lids. Silver lining of winter, there is time to think of a plan.
Click to expand...
Bigger scoop
 
dukeboy_318 said:
Bigger scoop
Click to expand...

It is already 8" tall and the diameter of the velocity stack tops (9") vs the small 6" air cleaners I was originally using, puts it not long enough also. The carb spacing on this tunnel ram is an odd 10.5" on center. Pushing my luck as it is. I would love to use the long version of the "Mopar Pro Stock Scoop" but they aren't tall enough. < 6" near the back carb.

Anyone think there were enough measurements in that reply to catch @krazykuda 's attention?
 
922BEE21-C192-4C7B-B6F0-4AA7D46A1F8E.jpeg
DCE80A7D-6C2F-4472-BFED-B7471C713C9B.jpeg
Pressure washing in shop. Mats are much better now.
 
Last edited:
toolmanmike said:
Morning all. On my second mug showered and ready for the day. Doing what I do best, pissing members off here.
Click to expand...
I feel your pain, as you know I am admin/moderator on a gun bunny site, total PITA. So last week I got asked to become a tech editor/admin on another gun bunny site, in my infinite wisdom I agreed. I was not prepared for the onslaught of questions not pertaining to tech side. Many are folks just not doing their research and want something handed to them with zero effort on their part. A sign of the times I guess.
 
Stopped for lunch, back to shop. Tomorrow is last day of isolation.
 
Sublime one said:
I feel your pain, as you know I am admin/moderator on a gun bunny site, total PITA. So last week I got asked to become a tech editor/admin on another gun bunny site, in my infinite wisdom I agreed. I was not prepared for the onslaught of questions not pertaining to tech side. Many are folks just not doing their research and want something handed to them with zero effort on their part. A sign of the times I guess.
Click to expand...
True that.
 
You must log in or register to reply here.
-

Back
Top