Mopar restoration shop in Ohio?

-

Superod

Well-Known Member
Joined
Aug 10, 2015
Messages
91
Reaction score
36
Location
Pennsylvania
Gents, I have a 1969 Barracuda project car thats in need of some work to help complete the restoration/modifications. I’m looking for a shop in the Columbus, Ohio area. Any recommendations??

Some specifics: The car has a pretty serious 360 in it and a 4 speed. I need the engine plumbing and wiring done, exhaust, rear setup, suspension and disc brakes. I may have a Tremec installed to replace the A833 depending on the cost of all the things listed above.

If you know of anyone that could help I would appreciate your recommendations. Thanks in advance!!
 
Mike Ross! Not sure exactly where his shop is in Ohio, but they do outstanding work. I'm sure @FJRdoc can fill you in about Mike, and put you in contact with him. Best of luck to you.

:thumbsup:
 
Thank you for the reply. I had recently gotten married and moved to Ohio and forgot to reply. But I did get in touch with Mike. My car is there now and you are right, he does amazing work! Once I get picture hosting figured out I will start a build thread.
Thank you!!!
 
Gents, I have a 1969 Barracuda project car thats in need of some work to help complete the restoration/modifications. I’m looking for a shop in the Columbus, Ohio area. Any recommendations??

Some specifics: The car has a pretty serious 360 in it and a 4 speed. I need the engine plumbing and wiring done, exhaust, rear setup, suspension and disc brakes. I may have a Tremec installed to replace the A833 depending on the cost of all the things listed above.

If you know of anyone that could help I would appreciate your recommendations. Thanks in advance!!
Sounds like the perfect job for Bob. Waters. I will see if I can get his contact info. He does 99% Mopars. I will send you a PM with his phone number.
 
Gents, I have a 1969 Barracuda project car thats in need of some work to help complete the restoration/modifications. I’m looking for a shop in the Columbus, Ohio area. Any recommendations??

Some specifics: The car has a pretty serious 360 in it and a 4 speed. I need the engine plumbing and wiring done, exhaust, rear setup, suspension and disc brakes. I may have a Tremec installed to replace the A833 depending on the cost of all the things listed above.

If you know of anyone that could help I would appreciate your recommendations. Thanks in advance!!
What kind of money do have in mind to spend on having that done?.. that's in what kind of number would you say yeah great do it and what kind of number would you say that's a little too much?..
Just talking ballpark...
 
Thanks guys. I really appreciate it but my car is already at B/E&A, Mike Ross' shop. My original post was a year ago but I forgot to reply and just noticed it yesterday. I apologize for the confusion.
Thank you!
 
-
Back
Top