UCA decisions

You will need to pull the control arms. If you have a vise or c-clamp you can use a socket that is the same size as the inner sleeve push the inner sleeve out. You will need a piece of pipe or a larger socket then the outer shell of the bushing on the opposite side of the bushing from which you are pushing. The sleeve should come out with little effort. Once the inner sleeve is out you will need to repeat the process by pushing out the bushing . You can leave the outer shell in place. Then you will need grease the inside and outside of the bushing. Then you will need reverse the process to re-assemble it. If you have any issue pm and I will walk you through it.

Thanks
James From
PST