Magnum swap down pipe info

-
mycuda

mycuda

FABO Gold Member
FABO Gold Member
Joined
Feb 15, 2011
Messages
5,217
Reaction score
3,490
Location
Chicago/ Metro
65 Dart magnum 5.2, 4spd , 72 dart ex. Manifolds.
Trying to find dual down pipes to begin fab.
Had flex pipes previous to get car drivable.
Now retro fitting 64 powersteering box/pump.locating pump under battery tray.
Anyone know somewhere to get something for starting point without spending $600
On something gonna have to cut....?
Preferably 2" to start.

Also need a 94" 7 rib belt that is unheard of
To make work. Could re rout belt but defeating tensioner.....

Or do I get different PS pump and start over..lol

Thanks. In advance
Dave

20220125_125537.jpg
 
Last edited:
That's a cool build. It's to bad the power steering boxes are so big, that's what takes up all the room when it comes to exhaust.
Are you running a magnum alternator bracket now? Why can't you run an original alt/ac bracket and put an idler in the ac spot and use a shorter belt? Or could you move your existing idler closer the water pump to make the belt shorter.
 
I don't think those '72 Dart manifolds will clear the new PS box- they clear on later As but not on the early ones, the outlet hits on the corner of the power box. They clear with a manual box though, as you know.
The Magnum PS pump and bracket from a van will clear the battery tray, it mounts lower than the Ram bracket.
 
Keith Mopar said:
That's a cool build. It's to bad the power steering boxes are so big, that's what takes up all the room when it comes to exhaust.
Are you running a magnum alternator bracket now? Why can't you run an original alt/ac bracket and put an idler in the ac spot and use a shorter belt? Or could you move your existing idler closer the water pump to make the belt shorter.
Click to expand...
Thanks.
Yep gonna move idle pully or find bigger diameter.
 
Professor Fate said:
I don't think those '72 Dart manifolds will clear the new PS box- they clear on later As but not on the early ones, the outlet hits on the corner of the power box. They clear with a manual box though, as you know.
The Magnum PS pump and bracket from a van will clear the battery tray, it mounts lower than the Ram bracket.
Click to expand...
Thanks
Thought I measured pretty close to clear
Let you know, tho.
 
You must log in or register to reply here.
-

Back
Top