Bill Crowell
Well-Known Member
Here's the engine compartment of my '62 V-200 more door daily driver. It has a warmed-up 360.
Calling all 60-2 Valiant and Lancer owners, info needed
- Thread starter barbee6043
- Start date
-
I like that. I am still trying to decide whether to replace the 170 slant with the 225 I picked up or drop in the 318. I had the oem lant rad recored for the oddball and hate to waste it ($400). sb radiator? Ii gues the SB gave you room for a standard sb radiator?
What exhaust man. did you use or headers?
Bill Crowell
Well-Known Member
For exhaust I am using P/N 3614368 (left) and 2863549 (right) manifolds off a '69-'70 Dart with a 340 because I think they are the only manifolds that will fit, and it was easier and cheaper than trying to use headers. I don't think they flow very well, but I'm not sure. What say you about these manifolds, Mopar guys?
The 60-62 thread dropped to page 4...well Ive got a question to revive it. Can someone tell me where the headlight ground wire originally attached to.
The headlight ground wire at the headlight bucket is grounded to one of the screws holding the headlight bucket assembly to the fender. The ring terminal sits on top of the bucket and not between the bucket and fender. Orientation of the ring terminal will need to be played with so the headlight trim piece will sit flush. Ring terminal position is less critical on Lancers because they have more room between the bucket assembly and the finish trim pieces.
Thanks for the reply!
SS Lancer
Well-Known Member
Anyone selling these plates ??
Aussies maybe??
Cal Tonsley
Well-Known Member
Not mine but here’s one for sale here in Aus if you’re interested
Valiant R And S Series Heater Opening Cover And Gaskets Set 2082294 | eBay
Hyper_pak
Old School Chrysler Fan
Postage to and from OZ is real high now. Not that it is ever cheap.
You also need the fan cover panel, but you can build one that will work.
You also need the fan cover panel, but you can build one that will work.
I wonder if a bead roller could duplicate that!?? Wish I had a bead roller, etc!
Hyper_pak
Old School Chrysler Fan
Bill, the big panel is a box. It was stamped.
I kind of figured as much, but a guy could make a reasonable block off and 99.9 of the peeps in the US would never know!!
There are so few 60-2 Lancers/Valiants left in the wild in nay form!!!
Hyper_pak
Old School Chrysler Fan
True, true!
Spencer Martin
Member
Hey everyone, I am looking for a detailed picture of the hood emblem. My '62 has the chrome, but I also have a hole where the emblem should be. I am thinking about making a replica emblem with my 3D printer. If you could take pictures of it with a ruler, I would really appreciate it!
Hyper_pak
Old School Chrysler Fan
I have a picture, no scale.
Around 2 wide, 4 to 5 high.
I have a spare rough bezel, no insert.
Around 2 wide, 4 to 5 high.
I have a spare rough bezel, no insert.
-
