Frontend Issues...

Hello Everyone,

Just want to give you a little update. I reached out to the original poster concerning his issue and we were able to determine that the upper control arms used in this kit were in fact correct based off a number of measurements/pictures I provided him. We also went over placement of the arms to ensure the position/location was correct which it was. The issue was in fact the lower control arms bushings. The were almost completely gone with metal sleeve on metal sleeve. He has since remedy the situation and should be able to move forward with the alignment. So the moral is look at the basics first and don't assume that all parts in the front end have been replaced at one time or another.

All in all glad it worked out and thanks to all that contributed.

James From
PST