Camber adjustment/rack and pinion

Please notice the aluminum spacers and the adjustable (in / out) poly ends. Combined they allow for maximum adjustment without putting the control arm in a bind. HDK builds the control arms to be installed as follows...

both spacers stacked to the rear........3 degrees of positive caster (manual)
spacers on each side......................4.5 degrees of positive caster (aggressive manual)
both spacers stacked to the front......6 degrees of positive caster (power)

it is also possible to adjust the ends in/out to achieve your desired camber / caster spec and have the cam alignment adjusters both at a 12 or 6 o'clock position (center)....best to eliminate bind.

HDK also offers chromoly tubular OEM replacement arms to achieve the same results....both in the small (early thru 72) and the large (73 and up) UCAs. $298 for both assemblies including adjustable UCA bump stops.

if you want to discuss this or any other specific questions or concerns, feel free to call. Denny / HDK 304-939-0097

20220127_140247.jpg