header delima...

RustyRatRod said
Make DAMN SURE your mounts are good AND the engine is mounted in the k frame STRAIGHT. a lot of guys overlook that. Since the k frame has slots where the mounts install, you can mount the engine crooked and cause interference issues with headers, much the same as a bad mount. Even with bad mounts and a crooked installation, the best damned headers in the world might still fit like ****.

one of the first discoveries when i looked under the hood...yesterday i looked at the bolts going thru the lower part of the motor mounts and both are missing the washers that go on the front side and but where not tighten down...i removed the nut on the pass side by hand...driver side if could have reached it i could have removed by hand also