A833 assembly tricks
I put the input on the main shaft and install it one piece bolt the tail shaft fast. Then put the front bearing in the oven at a certain temp and slip it on the input shaft .
Hold the input with a tool to tap the bearing in the case. It will slip on the shaft easy but be snug in the case until cool. install the small input snap ring without the outer ring so it seats on the input shaft. Then pull it out a tad and install the bearing retainer ring. Done.
What temp for the bearing ? I would have to ask my son he handles the heating. Just did Two Members this month Todds 23 spline and Waynes 18 spline. I buy everything from Dan @ Brewers Transmission
I have some Liberty crash boxes to do .Notice no syncos and shift shafts have no o-ring seals also 3/8 lever attachment threads . Orange box is out of well known Hemi drag car.
I put the input on the main shaft and install it one piece bolt the tail shaft fast. Then put the front bearing in the oven at a certain temp and slip it on the input shaft .
Hold the input with a tool to tap the bearing in the case. It will slip on the shaft easy but be snug in the case until cool. install the small input snap ring without the outer ring so it seats on the input shaft. Then pull it out a tad and install the bearing retainer ring. Done.
What temp for the bearing ? I would have to ask my son he handles the heating. Just did Two Members this month Todds 23 spline and Waynes 18 spline. I buy everything from Dan @ Brewers Transmission
I have some Liberty crash boxes to do .Notice no syncos and shift shafts have no o-ring seals also 3/8 lever attachment threads . Orange box is out of well known Hemi drag car.
