A833 no shift

Oldmanmopar said

if you went to the bigger clutch you must have went to a different bell. What fork did you use. There are different lengths. Also there are different pin spreads on some peddles. Most peddles have a 5 1/4 Inch pin spread. and some are 6 Inch. The 6 inch would give you a better disc release.

Click to expand...

It took me a couple years to source the parts before I started. The BH is a factory cast iron unit I bought from Brewers. The casting number matches one of the ones listed in the Slantsix site 4 speed article. Same article also says 3 speed fork and inspection cover interchange.

In post 4 I said clutch pedal was modified to 6" pin dimension.