challengergary
Well-Known Member
Well, started welding her back together last night
My 1970 Duster 340 FM3 project
- Thread starter challengergary
- Start date
-
Joe Mc
No Car Like A MoPar!
Yea!!! Now the fun (grinding down those plug welds) begins. I used a 3/8" x 14" (I think X 14"?) air belt sander that works pretty good, versus using a cut off wheel or grinder, helps reduce grinding other than welds... HF has em, but get this - "not the belts"??? I got 3M blue belts from a local body supply shop in different grits, pretty sure they were 40, 60, 80. As long as you don't press too hard and keep the roller centered, tool oiled and drive pulley/wheel clean, they belts last pretty long. Have fun
Ironracer
Gearhead
Right on. All manual Muscle car, just the way I like it
challengergary
Well-Known Member
Got the tail panel welded in place today as well as the trunk extension and braces. Still need to weld in the trunk lock support and tail light housings. that will have to wait for another day. For now though, she is starting to look like a car again!
Joe Mc
No Car Like A MoPar!
Great progress
challengergary
Well-Known Member
Guess it's been a while since I've posted any progress pics. It's been slower going than I would like but you know how it is. I've repaired the rust on the passenger side lower quarter and in front of the driver side wheel well. Basically, the back end is just about done.
R4Sedan
Larry
Nice to see you still moving along.
challengergary
Well-Known Member
How she sits right now. Going to try and do some work on her this weekend as well. May end up having to sell her fairly soon as I have been informed by my insurance provider that I need a new roof on my house and I really don't want to go into debt to do that 
I basically have a month to come up with the money to start the roofing process or I lose my coverage 
I basically have a month to come up with the money to start the roofing process or I lose my coverage
challengergary
Well-Known Member
I also managed to pick up the correct trunk lid at a show recently. It's rust free but needs a little bit of smoothing over
I hope you can come up with the funds and be able to keep the car. That said, I completely understand not wanting to borrow the money.
Dartswinger70
Well-Known Member
That's some real body work there That separates the men from the boys...
challengergary
Well-Known Member
Spent time after work today getting ready for the new floorpans. Hope to have at least one side finished up tomorrow after work.
challengergary
Well-Known Member
Making progress. Will wrap up on driver side later today and then move on to passenger side.
challengergary
Well-Known Member
And then I went and did a thing - Bought another Duster. This one is a numbers matching 1971 TX9 340 4-Speed car. Should have a B&W Plaid Bench Seat interior, chrome exhaust tips and a Gull Wing. Now I really have to decide if I am going to keep gong on the Pink car or not...
challengergary
Well-Known Member
In my defense, it was only about 2 miles from my work. I HAD to buy it 
K.O. SWINGER
Meeting in the alley since 1976
Great project keep up the good work.
abodyjoe
Well-Known Member
ahhhh black one is boring. finish the pink one
Yunick13
2 Time FABO NASCAR champ 2023 FABO NHRA champ
Finish the pink one, then flip it to do the black one
challengergary
Well-Known Member
I know, right!
challengergary
Well-Known Member
Well, no matter which one I end up keeping, gotta keep going on the pink one for a bit still. Can't leave things I started undone. Got the passenger floor all fitted. Hope to weld it in place tomorrow.
-
