318 custom badging?
@Dana67Dart
If it's the 383 four barrel style I need some dimensions.
Length and width of the top chrome section of the "3"
1 3/32” x 23/32”
The backside length and width of the "3"
1 3/16” x 9/16”
The thickness of the "3"
7/32”
The length and width of the chrome front of the Four Barrel bar
3” x 9/32”
The length and width of the back of the Four Barrel bar
3 5/32” x 17/32”
The distance between the bottom of the "3" and the top of the bar
1/4”
The height and width of "L"
5/32” x 5/32”
The width of the horizontal and vertical sections of the "L"
1/32 x 3/64”
The depth of the lettering on the bar.
1/32”
We can figure the pins later or you can use adhesive to secure.
2 3/4” on center is the width but they are offset. Double sided tape would be an acceptable option.
@Dana67Dart
If it's the 383 four barrel style I need some dimensions.
Length and width of the top chrome section of the "3"
1 3/32” x 23/32”
The backside length and width of the "3"
1 3/16” x 9/16”
The thickness of the "3"
7/32”
The length and width of the chrome front of the Four Barrel bar
3” x 9/32”
The length and width of the back of the Four Barrel bar
3 5/32” x 17/32”
The distance between the bottom of the "3" and the top of the bar
1/4”
The height and width of "L"
5/32” x 5/32”
The width of the horizontal and vertical sections of the "L"
1/32 x 3/64”
The depth of the lettering on the bar.
1/32”
We can figure the pins later or you can use adhesive to secure.
2 3/4” on center is the width but they are offset. Double sided tape would be an acceptable option.
